Battery Reconditioning Charger is an electrical devise that gives your dying battery a new lease of life. It is important to make note of the fact that the capacity of your battery (may it be car, cell phone or laptop) cannot be improved.
Nonetheless, battery reconditioned charger does improve the overall productivity of your malfunctioning battery. This implies that instead of buying a new battery, you can improve its performance using a specialized re-conditioner and save your hard earned money in return.
So, the next time your battery charger says recondition then, do not ignore its advice (pun intended). Keeping this in mind, let me begin with this write-up.
>>> Leaked Secret Reveals How To Bring Any Dead Battery Back To Life Again – Just Like New!!! <<<
Battery Reconditioning Charger Article Contents
1) What is a Battery Reconditioning Charger?
2) What does a Battery Reconditioning Charger Contain?
3) What is Battery Reconditioning Charger Mode?
4) How Does a Battery Reconditioning Charger Work in Your Favor?
5) How Can a Battery Reconditioning Charger Save Your Money?
6) Are there any Drawbacks to Using a Car Battery Reconditioning Charger?
7) How to Choose the Best Battery Reconditioning Charger?
8) What is the Best Heavy Duty Battery Reconditioning Charger?
9) Who Makes the Best Car Battery Reconditioning Charger?
10) FAQ on Battery Reconditioning Charger
11) Conclusion
What is a Battery Reconditioning Charger?
There are two main types of battery reconditioning chargers. The first are those that you usually have at home and keep at the local garage. The second variety is an industry standard charger.
While the first does the job of reconditioning your old battery, it does a shoddy job. The lack of microprocessors in a general makeshift reconditioning charger for the battery, tends to damage the electrics within the battery.
The industry standard reconditioning charger (on the other hand) contains special electrical chips that control the voltage and current flow. Hence, while reconditioning your old batteries, just the correct amount of current and voltage is delivered.
This negates overcharging the old battery. Unused batteries too become capable of getting optimally recharged via the industry standard charger. This specialized machinery has the ability to read the old battery’s lifecycle and makes adjustments to optimize it.
What does a Battery Reconditioning Charger Contain?
A battery reconditioning charger is not a Time Machine. It is a simple instrument that has a microprocessor with a mechanism to give a new lease of life to your dying battery.
Here is what all it contains:
>>> An industry standard reconditioning charger comes equipped with multi bank battery charger.
>>> It is also equipped with a special maintainer. It helps keeps the devise under check at all times.
>>> You have battery clamps with the devise. You get two pairs. These have integrated eyelets and are usually 21 inches in length.
>>> You also get a pair of inlet cables. So, you get two in total that are 10 feet in length.
>>> The battery reconditioning charger has a special mechanism using which, they dissolve sulfur deposits. These deposits on the terminals and bolts tend to reduce the life-life span of the battery.
>>> They contain specialized microprocessor chips that charge the battery optimally. So, the chances of undercharging and overcharging are negated.
What is Battery Reconditioning Charger Mode?
Battery reconditioning charger mode is the method used in desulfating your batteries. These chargers are good for gel, AGM and even calcium batteries.
These can contain several modes, yet the ones I am lasting below are identical to most:
The Desulfasion Step:
In case you have not used your car’s battery for a long time period then, sulfur deposits onto your battery terminals, cells and bolts. Battery reconditioning charger helps remove these deposits.
Initial Charge:
Your battery reconditioning charger shall then recharge your battery. In this particular step, the changing mode shall be of very low voltage. The slow current shall help the battery recover.
In a slow yet steady manner, it’s (the battery) power shall be brought back to mark. So your battery is not at all harmed and is brought back to optimal functioning slowly.
Maintaining the Current at a Constant Level:
In order to optimize the battery, constant current is pushed into the battery. Here, your battery is going to see a lot of current being pushed into it in a relatively short time span.
For example, you have a12 volt charger then, the battery reconditioning charger shall push in 14.5 volts into your battery. Once your battery is 79% charged, the power shall be turned off.
Maintaining Constant Voltage:
Here the battery reconditioning charger shall provide constant voltage to your battery. Over here, the current is reduced and your battery is provided with a slow charge.
The voltage is 14.4 volts and is kept constant. This in turn ensures that you have maximum absorption capability. I am giving these figures based on the assumption that you are using a 12 volt charger for this purpose.
The Battery Gets a Test Run:
Once the battery has achieved constant current and maximum voltage absorption, it is time to get it tested. The test ensures whether your battery is performing optimally or not.
This is a test that lasts one and a half minutes in length. In this time duration, it is analyzed whether your battery is capable of maintaining constant voltage or not.
Battery Reconditioning Process:
If the absorption rate cannot be maintained in the 1.5 minute test then, the battery reconditioning charger shall recondition your battery.
Here, constant current of low capacity is fed to the battery for a period of 4.5 hours. After four and a half hours are complete, the float mode is achieved. This helps recover batteries that have been drained for a prolonged time frame.
Achieving the Float Stage:
In this step, the battery reconditioning charger shall feed the battery with a constant supply of current and voltage. So, overcharging and undercharging is complete avoided. If you want, you can leave the battery reconditioning charger hooked to the batter forever.
How Does a Battery Reconditioning Charger Work in Your Favor?
Well, the whole point of getting home this machine is to ease your life. I am not discussing the advantages of this reconditioning machine. In this subheading, I shall outline the points that make a battery reconditioning charger an asset:
All in One Solution:
Battery reconditioning charger is an all-in-one devise that is much sought after by all auto lovers. It has a battery charger with 2bank capacity, desulfator, battery maintenance microprocessor and trickle charger.
Reconditions Wide Variety of Machines:
Most machines have a two way mechanism. Here, you may use a 2 amps and a 4 amps bank. This helps you ensure that you are able to maintain the batteries of your truck, RV, ship, boat, car, cellphone, lawn mower and even ATV.
Reconditions Wide Variety of Batteries:
These devises have the ability to recondition a wide variety of batteries. You can recondition lithium-ion, lead-acid, gel based, flooded, deep-cycle, marine and even AMG batteries. You can recharge 6 volt to even 12 volt batteries.
Helps Prolong Your Battery Life:
Battery reconditioning charger has the capability to eradicate acid stratification. It detects sulfur deposits on your battery cells and removes them automatically. This not only strengthens your battery but also helps your vehicle perform better.
Thermal Sensors:
Battery reconditioning charger has special thermal sensors. This permits them to provide power to your battery despite the weather conditions. This leads to ambient temperature within the battery.
For example, if it is 60 degree Celsius outside, the battery reconditioning charger shall atop overcharging. At the same time, if it is sub-zero outside, your vehicles battery shall not under-charge.
1 Volt Battery Recharges:
In case your car’s battery is delivering power under 1 volt, this charger can help your battery get on track. With the help of its microprocessor, battery reconditioning charger slowly increases the voltage by feeding current into your battery.
Maintenance Free Battery:
When you connect this devise to your car’s battery, you can be rest assured that the need for maintenance is given a back-seat. In simpler words, you can hope to enjoy a trouble-free battery that runs longer than its lifespan.
How Can a Battery Reconditioning Charger Save Your Money?
Well, a new car battery is not cheap. You shall end up spending $150 (on an average) for a new one. So, that is an expensive affair. iPhone batteries may set you back by $70.
So, in order to cut down these unnecessary costs, you need to ensure that you keep them healthy. To prolong their lifespan (even twice over) you should opt for a battery reconditioning charger.
Your total saving is directly dependent on the total number of items that you have that require batteries to run. So, if you have 10 items that use batteries to run, a battery reconditioning charger can prolong their life span. This in turn implies that you save thousands of dollars.
So, run a simple math analysis. Make a list of all the electrical devises that you have that use batteries. Analyze the shelf life of each battery. Then, double the shelf life of each battery after using reconditioning charger for your battery. You can then make an assessment of the total $$$ you save.
Are there any Drawbacks to Using a Battery Reconditioning Charger?
As such I cannot find any negative impact of getting home a battery reconditioning charger. Apart from spending $50 to $100 to get home this devise, there is no other way it shall dent your savings.
You may need a custom charger for a few specific devises. Seiko and other Analog devises may not be fully compatible with a universal reconditioning charger. You may have to purchase a compatible charger for these devises.
The cost per watt hour too may be an issue for some people. $3.00 on an average is the cost for lithium-ion-batteries. NiMH batteries may cost you slightly less.
How to Choose the Best Battery Reconditioning Charger?
The best battery reconditioning charger is an asset. You need to get hold of one if you have a lot of batteries to recondition. If you have an iPhone, lawn mower, car or a small boat then, this devise shall help you save money.
Here are a few tips:
Look for a Reputed Brand:
While many manufacturers are making and selling this product, only the reputed brands should be given a preference. NOCO Genius, Stanley and CTEK are reputed brands. These brands offer after sales service and have warranty on their product.
Small in Size but High in Power:
A good car battery reconditioning charger is always small and compact. This makes it easy to carry. I would recommend a 9 inch length.
.At the same time, the power delivered is always on the higher side. I would recommend going in for 150 watt power output machine. The charging current should be in between 5 Amps to 10 Amps.
Auto Detection & Auto Repair Mechanism:
I also prefer my car battery reconditioning charger to have the capability to detect issues with the battery. Basically, it should detect acid stratification and suflation automatically.
Then, the microprocessor within this devise should kick-in to repair the damage. Once the battery improves, your vehicle starts easily and drives smoothly.
Thermal Sensor:
My chosen devise should always have the ability to adjust its charging cycle as per the ambient temperature. If it is too cold or too hot then, the devise should not falter. The charging should be constant even if it is freezing or boiling outside.
Modes for Various Battery Types:
12 Volt Mode: If you have a wet cell based gel battery then, this mode is best suited. It is also good for ‘calcium’ as well as ‘maintenance free’ batteries.
Force Mode: This is a special mode that helps recharge batteries that are extremely low on power. So, if your battery is below the 1 volt mark then, this mode should help power-up your battery.
The Supply Mode: This is also 12 volts and it helps power a devise that is using Direct Current to function. So, this mode shall covert AC into DC.
The AGM Mode: This is also a mode that powers the AGM battery. It should offer a 12 volt power delivery mechanism.
The Repairing Mode: Your chosen car battery reconditioning charger should contain a repair mode as well. In case your battery is damaged, stratified or drained then, this mode shall help it recover. This helps in reconditioning your old batteries easily.
Lithium-Ion Power Mode: Your chosen devise should contain a special charging mode that is meant to power lithium-ion batteries. Your devise should be compatible with Battery Management System that is used in Lithium-Ion batteries.
If all the above modes are present in your chosen battery reconditioning charger then, it is definitely a boon for you.
Advance Diagnostic Functions:
I always pick a charger that offers a wide array of diagnostics. Here are a few of these:
The Standby Mode: My charger should have a standby mode. It should get activated when the charger is in standby mode. If your battery has way too low voltage then again, the standby mode should get activated.
High Voltage Detection: In case your battery is short or is unable to hold charge then, your charger should indicate this issue immediately. An indication shall help resolve your issue.
Reverse Polarity: This option permits you to detect reverse battery connections. So, you are never kept in the dark with regards to a battery connectivity issue.
The Charging Levels:
Your chosen battery reconditioning charger should ideally have 6 modes with regards to the current charging levels. Let me walk you through each of these:
One Fourth Charge Indicator: This is an indicator that helps you understand that you still have 75% charging time left. The 25% charging indicator is usually denoted by a red mark that beeps continuously.
Half Charge Indicator: This is an indicator that showcases that your battery has been charged 50%. The red dots are still blinking at this stage.
Three Fourth Charge Achieved: This indicator level showcases that your battery has achieved 75% charge. In my charger, the color changes from red to orange.
Optimization Charge Achieved: Here, my battery reconditioning charges displays a bold green color. The tiny block embossed in green color is blinking. This indicates that the charger is further optimizing the charge for extending the battery life.
Full Charge Indicator: When the battery is fully charged, the color shall change to solid green. The LED indicator does not pulsate.
The Optimization Charge Indicator: Once the battery has been completely charged, the next step is optimisation. The green button starts to pulsate in a slow yet steady manner. Allow this to happen until the charger disconnects itself automatically.
What is the Best Heavy Duty Battery Reconditioning Charger?
While there are several battery chargers available out there, the one I am particularly fond of is CTEK Multi US 7002. This is a battery reconditioning charger that is best suited for SUVs and trucks.
It has a specialized microchip that helps maintain the electrical parts in your battery. At the same time, the chances of ‘undercharge’ and ‘overcharge’ are completely negated here. This recharger helps relieve batteries that have been deeply discharged.
What I Like about this Heavy Duty Battery Reconditioning Charger?
Eight Step Charging Mechanism:
There are 8 stages in which the battery recharger helps your battery become even. These modes include Desulfasion, Soft Start, Bulk, Absorption, Analysis, Reconditioning, Float and Maintenance.
Powerful 12 Volt Battery Charger:
The charger has a 12 volt power backup that helps recondition your vehicle’s batteries easily. Numerous charging modes add to the product being considered a super-powerful devise for your battery upkeep.
All Weather Condition Usage:
Regardless of whether it is boiling hot or freezing outside, the CTEK Multi US 7002 performs effortlessly. There is no slack in its current delivery process to your battery. The temperature variation varies from -4 degrees Fahrenheit to 122 degrees Fahrenheit.
Permanent Connectivity:
There is a special connection mechanism using which, you can connect this charger to the battery permanently. These are eyelet terminals that keep the battery connected permanently. Pulse charging helps maintain optimal battery performance.
Diverse Current Range:
You can connect this charger to your battery indefinitely. The dependency is on input voltage, which is variable in nature. Low current as well as current drain issue is minimized here. The input voltage is kept completely independent here.
Diverse Leads and Warranty:
The CTEK Multi US 7002 has two different kinds of leads that connect the devise to your battery. One is eyelet and the other is connected via clamps. Moreover, the warranty on this product is for 5 long years.
It Offers Utmost Safety Levels:
CTEK Multi US 7002 battery reconditioning recharging mechanism is made secure. There is no scope of a spark. Reverse polarity issue is also completely negated. It is also free from short circuit.
In case the charger is not optimally connected to the battery then, you shall continue getting a red light. This is a clear indicator that you need to work on your connections.
Affordable Pricing:
Finally, I like the price of the CTEK Multi US 7002. It is pegged at $123, which is considered highly affordable in nature. So, it is a price that can keep your pockets full.
FAQ on Battery Reconditioning Charger
Q-1: What Does a Battery Reconditioning Charger Do?
A-1: The main purpose of a battery reconditioning charger is to provide power to revive your dying battery. It also powers your battery permanently. Acid stratification and sulfation is also removed with the help of this devise.
Q-2: Is it Profitable to Recondition Your Battery using a Charger?
A-2: Yes, it is definitely profitable. If you have more than a single devise that runs on battery then, reconditioning them prolongs their lifespan. So, the money you save on buying a new battery becomes your asset.
Q-3: Is Battery Reconditioning Good for the Environment?
A-3: Yes, when you continue using the same battery for several years, you avoid contributing to electronic waste. So, you end up saving your hard earned money and keep the environment safe.
Q-4: Can a Battery Charger Desulfate a Battery?
A-4: The answer is ‘yes’. Once you connect the battery to the charger, it shall read the current status of your battery. After the study is complete, the desulfation process shall be initiated.
Q-5: How Long can an AGM Battery Last after the reconditioning Process is Completed Successfully?
A-5: An AGM battery is long lasting in nature. It should remain with you for another 4 to 6 years after the reconditioning process is completed successfully.
Q-6: What Batteries Last Longer when reconditioned – Lithium Ion or AGM?
A-6: The discharge depth of lithium-ion batteries is far superior to that offered by AGM. So, you can be rest assured that Lithium-Ion shall last you five to six times the lifespan of an AGM.
Q-7: Can I Leave a Battery Reconditioning Charger Connected to My Car Battery?
A-7: Yes, you can connect your battery reconditioning charger to your car battery indefinitely. It shall not cause any sort of damage to its machinery.
Q-8: How do I Take Care of My New Battery Reconditioning Charger?
A-8: Manufacturers always leave behind a special care note. Follow the steps to prolong the shelf life of your reconditioning charger. Keep it in its original case and away from direct sunlight. Store in a cool, dry place.
Here is My Opinion on Battery Reconditioning Charger
Battery reconditioning charger is definitely an asset for you. This tiny devise not only recharges your battery, it also rectifies its faults. You can get one online or from a regular shop.
An ideal budget range for this devise would be in between $100 to $150. You should be able to get hold of a suitable car charger in this amount.
The money that you shall save after reconditioning your old batteries far exceeds the cost you paid to purchase this devise. So in my opinion, it is a great product to go in for.
Learning a thing or two about how to recondition your batteries at home correctly is also important. When you master this art, not only can you refurbish your old batteries but also help your friends and neighbors recondition theirs.
Soon, you can make battery reconditioning your side business to create a steady stream of income.